22.11.09

List of Content

I am sorry, this blog not finish yet...you can enjoy this blog approximate a month latter...thank's.

1.   Material For Injection Mold.
2.   Basic Calculation.
       2.1 Calculation of Clamping force for the Mold.
              2.1.1 Viscosity Factor (Flow Factor) Material in the Mold.
              2.1.2 Maximun Flow path  - Wall thickness of the Mold.
       2.2  Mold Cooling.
              2.2.1 Enthalphy Curves for Various thermoplastics
              2.2.2 Calculation of Cooling time for the Mold.
              2.2.3 Cooling Time Diagram.
      2.3 Calculation of Mold Heating.
      2.4 Cycle Time Calculation for the Mold.
      2.5 Shot weight Calculation for Machine.
4.   Design of Moldings.
      4.1 Compensating for Different Wall Thickness.
      4.2 Transitions.
      4.3 Design of Ribs.
      4.4 Camouflage of Sinkmark  at Rib Transitions.
      4.5 Distortion Resulting from Ribs Present on One Side
            for Various Rib Wall Thicnkess.
      4.6 Distortion from Wall Thickness Different and Special
            Thickness of Material.
5.   Mold Design.
      5.1 Basic Mold Design.
      5.2 Sprue and Runners.
      5.4 Venting the Mold.
      5.5 Mold cooling and Cooling Channel.
      5.6 Mold Temperatures.
      5.7 Ejector System.
6.   Mold Manufactures. 
7.   Mold Operation.
8.   Basic Information of Injection Molding.
9.   Plastics Resin.
10. Sample Mold Assembling drawing of Product in the Market.
11. Literatur.


4 comments:

  1. yahh kok masih belum complit aja ya....kapan dong selesainya..???

    ReplyDelete
  2. Nice info, tapi aq gak ngertiii... soalnya bukan bidang q... btw, mampir2 ya ke blog aq... tengkyuuu

    ReplyDelete
  3. oke pasti aku akan kunjungi...

    ReplyDelete
  4. why till now haven finish?
    i nid the info....T.T
    can tell me more about double ejection mechanism?

    ReplyDelete